Mit dem neuen Rechenwerk Supercal 5 von NeoVac setzen Planerinnen und Planer, Installateurinnen und Nutzer auf Wärme- und Kältemessung der nächsten Generation.
Even more flexible, even simpler, even more versatile: The Supercal 5 is more than just the successor to the proven Supercal 531. "The new calculator impresses with state-of-the-art technologies and innovative features. During development, the focus was on the needs of planners, installers, and users, as well as on future requirements and standards," explains Bernhard Joos, Head of Technology/Quality Assurance at NeoVac ATA AG. The result is a multifunctional calculator that sets new standards in heat and cold measurement. Among other things, the Supercal 5 demonstrates that technological progress doesn't complicate things, but simplifies them. Whether during installation and system integration, subsequent expansion, or during use – simplicity and flexibility are guaranteed with the new calculator. "The Supercal 5 is based on a user-friendly and modular concept. The individual modules can be replaced or retrofitted at any time. Thanks to the optimized housing, the device is even more robust and offers greater freedom during installation," says Joos.
The Supercal 531 has already established itself as an all-rounder for measuring heat and cold. Its successor sets new standards with numerous improvements and clever features (see box below).
Multifunctional technology with compelling features:
The Supercal 5 is characterized by state-of-the-art technology and high user-friendliness. It also scores points with simplified system integration, intelligent tariff and data logging functions, universal data transmission options, and flexible connection to control systems.
With its innovative functions and compelling features, the Supercal 5 is suitable for measuring heat, cold, or flow, as well as for combined heat and cold measurement. The volume inlet can be individually combined with mechanical, magnetic-inductive ultrasonic, or vibrating beam flow sensors. Thanks to its comprehensive data communication options and its flexibility in acquiring and recording dynamic system data, the Supercal 5 is also suitable for use in district heating networks and industrial plants.
Features at a glance
- Multifunctional calculator for heat meters, cold meters or combined heat/cold meters
- High-precision measuring technology with temperature measurement cycles from 3 seconds (mains operation) to 10 seconds (battery operation)
- Simple operating and reading concept with display of current values, date values, monthly values, and configurations. Optional: 32 average values, service information, test and parameterization mode.
- Replaceable top part (MET), the wiring remains untouched
- Two- or four-wire temperature sensors without any pre-configuration
- Multiple communication options as standard
– Built-in M-Bus interface according to EN 1434-3
– Optical interface according to IEC 62056-21:2002
– 2 pulse/status inputs and 2 pulse/status open-drain outputs - Optional plug-and-play modules (replacement or expansion) without affecting the approval
– Module with 2 analog outputs (0 .. 20 mA, 4 .. 20 mA, 0(2) .. 10 VDC)
– Module with 2 digital inputs (status / pulse)
– Module with 2 digital outputs (status / pulse)
– M-Bus module
– BACnet/Modbus module data logger - Optional radio communication
– Bidirectional radio communication
– Unidirectional wM-Bus radio communication
– LoRaWAN - Optional plug-and-play power supply modules for battery or mains operation without affecting approval
– Lithium-D battery 3.6 V
– Mains 24 VDC / 24 VAC (12 to 42 VDC / 12 to 36 VAC)
– Mains 230 VAC – 50/60 Hz (from 90 VAC to 240 VAC) - Self-detection of optional modules
- Fully configurable data logger with storage space for up to 2175 values and diverse recording options
– Up to 4 individual historical registers for recording energy, volume, input values
– Average values
– Maximum values
– Event log - Powerful additional functions for individual requirements
– Output of status messages (malfunctions) via the transistor outputs
– Alarms and thresholds for monitoring operating states
– Up to three different, freely programmable tariff functions
– Use in solar and refrigeration systems down to -20 °C, the mixing ratios are freely programmable
The new Supercal 5
Even more versatile
– Fully customizable tariff and data logger functions
– Versatile, programmable tariff options
– Two- or four-wire temperature sensors without pre-configuration
– 2 pulse/state inputs and 2 pulse/state open-drain outputs
– Plug-and-play interfaces for every application
Even more flexible
– Interchangeable power supply and communication modules
– Individual retrofitting and replacement of individual modules without affecting the approval
– Module exchange and integration via plug-and-play
– Battery or mains operation
– State-dependent programmable outputs including logic gates
Even more robust
– Over 10 years of worry-free battery operation
– New housing with reinforced closure and IP65 protection
– More space for wiring
– Extendable mounting pads for easy DIN rail mounting
– Minimized interruptions during recalibration thanks to smart design
Even simpler
– NFC technology for simplified configuration
– Large illuminated dot-matrix display with user-friendly and customizable menu navigation
– Easy operation via two buttons
– Real-time status display via two LEDs
Even more innovative
– data readout via NFC or optical interface according to IEC 62056-21:2002 possible
– expanded data storage for comprehensive monitoring
– volume input combinable with a variety of sensors
– designed for future standards
– highest accuracy for every application
neovac.ch
Link for even more information , technical details and a 360° view.
